SDSHobby
DLA32 CNC PROCESSED GASOLINE ENGINE/PETROL ENGINE 32CC FOR GAS AIRPLANES WITH SINGLE CYLINDER AND NSK BEARING
Parameters & Performance:, , Power:, 3.8HP/8200rpm, Idle speed:, 1700rpm/min., Pull Force:, 8.8Kg /100meters Altitude, Recommended Propeller:, 18x8, 18x10, 19x8, 20x8, Spark Plug:, CM-6, Amount:, 32.23cc, Diameter* Stroke:, 37mm*30mm, Ratio of Compression:, 7.6 : 1, Lubrication Ratio:, 30 : 1 (Trial Run), 40: 1--50 : 1(Normal Flying), Weight:, Main engine -910g, Muffler-65g, Ignition-100g, Included Spare Parts:, , Features:, , Material of Muffler and crankcase:, Aluminum Magnesium Alloy (Aluminum Alloy for DLE30), Machining:, , Crank Case Material:, the newest aero material makes DLA32 engines too hard to be damaged.,
7.8Kg /1800meters Altitude Exhaust 1 x DLA 32CC Engine 1 ...SDSHobby
CNC CRRC GF55II 55CC TWIN CYLINDER GASOLINE ENGINE/PETROL ENGINE FOR RC AIRPLANE WITH WALBRO CARBURETOR
Specifications:, Displacement:, 55CC (27.2CC*2), Bore x Stroke:, 34mm*30mm, Weight:, 1780g, Carburetor:, Walbro (Diaphragm butterfly valve type), Maximum Output:, 5.6HP/7600RPM, RPM Range:, 1600-7800rpm, Ignition:, DC-CDI (4.8V), Gasoline-Version:, Pre-mixed Fuel, 25-40 (Gasoline):1, Lubrication Oil:, two-stroke engine oil, Propeller:, 0*12-23*8 Two blades prop (suggest using 22x8 prop), Cooling System:, Air Cooled, Included the Following Parts:,
(including CDI and Muffler) Engine*1pcs Washers*2pcs Installation Screw*8pcs Muffler*2pcs CDI ...SDSHobby
CRRCPRO GF50I 50CC GAS ENGINE/PETROL ENGINE FOR RC AIRPLANE WITH WALBRO CARBURETOR
Specifications:, Displacement:, 50cc, Bore *Stroke:, 45mm* 31mm, Weight:, 1696g, Carburetor:, Walbro (Diaphragm butterfly valve type), Maximum Output:, 5 HP at 7800 RPM, Speed range:, 1600-7800 RPM, Ignition:, DC-CDI - EMI Certified, auto advance, Fuel mixture:, , Lubrication Oil:, cycle air cooled engine oil, Recommended Propeller:, 2 X 8, 20 X 10, Cooling System:, Air Cooled, Included the Following:,
(Including CDI and Muffler) 32-1 break-in, 40- 1 after break-in ...SDSHobby
CRRCPRO GF26I 26CC GASOLINE ENGINE/PETROL ENGINE FOR RC AIRPLANE WITH WALBRO CARBURETOR
Specifications:, Displacement:, 6cc, Bore x Stroke:, 34mm*28.6mm, Weight:, 1194g, Carburetor:, Walbro (Diaphragm butterfly valve type), Maximum Output:, .4ps / 9000rmp, Speed range:, 1600-9500rpm, Ignition:, DC-CDI, Gasoline-Version:, Pre-mixed Fuel, 25-40 (Gasoline): 1, Lubrication Oil:, cycle engine oil, Propeller:, 16x8, 16x10, 17x8, 17x10 (Two blades prop), Cooling System:, Air Cooled, Included the Following Parts:,
(Including CDI and Muffler) Engine Walbro Carburetor Plug Spanner*2pcs CDI ...SDSHobby
NEW EME MUFFLER CANISTER SET FOR DLE30, EME35 OR 20-35CC GAS ENGINE
Application:, The muffler set can be used for DLE30, EME35 or 20-35CC Gas Engine, Package Lists:, Muffler*1, Features:, The muffler is designed with 3 sets,
Exhaust Pipe*1 Oil-proof converted silicone tube*1 Teflon Pipe*1 Metal Clip*3 ...SDSHobby
REMOTE CONTROLLED TWO-CYLINDER NITRO ENGINE GLOW PLUG DRIVER RCD3004 (BUZZER VERSION)
Features:, Supply power for two-cylinder engine simultaneously, Application:, Start and stabilizing for two-cylinder engine, Function Description:, , Typical Application:, , A: Receiver B: RCD3004, C: External connection to the outside buzzer, D: Black line for connecting engine housing, red line for two glow plugs, E: Receiver battery pack 3.2~8.4V,
Independent power supply, working voltage 3.2V-8.4V Red and blue LED ...SDSHobby
DLA58 CNC PROCESSED GASOLINE ENGINE/PETROL ENGINE 58CC FOR GASOLINE AIRPLANES WITH WALBRO CARBURETOR AND NSK BEARING
| Power | 6.0HP/8500rpm |
| Idle Speed | 1300 rpm/min |
| Pulling Force | 15Kg / 100 meters Altitude (14.2kg for DLE55) |
| Recommended Propeller | 22x8, 22x10, 23x8, 23x10 |
| Sparking Plug | DLA CM6 |
| Carburetor | Walbro (made in Japan) |
| Exhaust Amount | 58cc |
| Diameter*Stroke | 46mm*35mm |
| Ratio of Compression | 7.8 |
| Weight | Main Engine-1310g, Exhaust Pipe-110g, Ignition-135g |
| Material of Muffler and crankcase | Aluminum Magnesium Alloy (Aluminum Alloy for DLE55) |
| Machining | CNC processed, while others are not. |
| Crank Case Material | the newest aero material makes DLA58 engines too hard to be damaged. |
Parameters & Performance:, Ratio of Lubricating Capacity: 30:1--40:1 (Trial Run), 40: 1--50:1(Normal Flying), Included Spare Parts:, 1 x DLA 58CC Engine, Features:,
13.5Kg / 1800 meters Altitude (12.5kg for DLE55) 1 x ...SDSHobby
2.4G 1/8TH SCALE NITRO OFF ROAD RC BUGGY CAR (NO. 083420) WITH 4WD SYSTEM/ 21CXP NITRO ENGINE
| Length | 500 mm |
| Width | 307 mm |
| Height | 230 mm |
| Wheelbase | 325 mm |
| Tread (F/R) | 300/305 mm |
| Wheel Diameter | 114mm |
| Wheel Height | 40mm |
| Gear Rate | 11.7 |
| Weight | 3.5 kg |
| Engine | 21CXP |
Specifications:, WARNING:, , Features:,
Before you operate your car model for the first time, ...SDSHobby
PROPELLER SHAFT ADAPTER FOR DLE30 DLE 30CC GASOLINE ENGINES
Package Lists:, 4pcs*screws, 1pc*washer, 1pc*propeller shaft, 1pc*nut, Usage Instruction:, First, take away the front propeller washer and 4pcs prop mounting screws of DLE30 engine, then mount the, Features:, After using the prop shaft adapter, users will,
iron propeller shaft on the rear prop shaft of DLE30 ...SDSHobby
PROPELLER SHAFT ADAPTER FOR DLE55 DLE 55CC GASOLINE ENGINES
Package Lists:, 4pcs*screws, 1pc*washer, 1pc*iron propeller shaft, 1pc*nut, Usage Instruction:, First, take away the front propeller washer and 4pcs prop mounting screws of DLE55 engine, then mount the, Features:, After using the prop shaft adapter, users will,
iron propeller shaft on the rear prop shaft of DLE55 ...SDSHobby
DJ85 85CC TWO STROKES GASOLINE ENGINE/ PETROL ENGINE WITH WALBRO CARBURETOR CM6 SPARK PLUG FOR RC AIRPLANE
| Displacement | 85CC |
| Cylinder Diameter | 52mm |
| Stroke | 40mm |
| Spark Plug | NGK CM6 |
| Carburetor | Walbro (made in Japan) |
| Output Power | 8.5 hp/8000rpm |
| Weight | 1795g (w/o ignition & muffler) |
| RPM Range | 1200 to 8000RPM |
| Recommended Propeller | 23×10- 26×10 (NOT Included) |
| Mixture Ratio | 1 (lube oil) |
| Fuel | petrol 93# or above, two strokes motorcycle engine oil |
Performance & Parameters:, Package Contents:,
DJ85 engine*1pcs Exhaust Pipe*1pcs CDI Ignition*1pcs Installation Parts*1pcsSDSHobby
DLA116-INLINE CNC PROCESSED INLINE GASOLINE ENGINE/PETROL ENGINE 116CC FOR GAS AIRPLANES WITH DOUBLE CYLINDERS
| Engine Body | spaceflight aluminum material, CNC precisely processed |
| Carburetor | original |
| Bearing | original FAG from Germany |
| Needle Bearing | original IKO from Japan |
| Crankshaft | spaceflight special material, CNC precisely processed |
| Exhaust Amount | 116CC |
| Power | 12.8 |
| Idle speed | 1200rpm/min, high speed |
| Pull Force | 28kg/500 meters Altitude, 25kg/1800 meters Altitude |
| Diameter* Stroke | 46mm*45mm |
| Spark Plug | DLA CM6 (Iridium) |
| Adaptable voltage | 6.6V-8.4V (2S) |
| Weight | Main engine 2900g; Exhaust pipe 350g*2; Ignition 180g*2 |
Features:, has the following advantages:, Parameters & Performance:, 6400-6600rpm (JXF29*10), Recommended Propeller:, 7*10, 28*10, 29*10, 26*12, 27*12 (Recommended 29*10), Lubrication Ratio: 25:1~30:1 (Trial Run), 40:1~45:1(Normal Flying), Included Spare Parts:,
Coming with stable idle speed and performance and its pull ...SDSHobby
6STAR 4IN/102MM SPECIAL DRILLED CNC ANODIZED ALUMINUM ALLOY SPINNER FOR DLE85 DLE111 DLE120 EME120 DLA116 DA150 ENGINES
| Height | 100mm |
| Diameter of Bottom Plate | 4in/102mm |
| Aperture of Bottom Plate | 10mm |
| Screw | M5*65mm(screw thread length |
Features:, Quick and easy installation:, 1), Specifications:, Application Fields:, 1. Engines:, Suitable for DLE85/111/120, DA85/100/150,, . Propellers:, Suitable for 27*10 to 28*10 propellers (such as, Worm Tips:, There are ±1mm tolerance for manual measurement, the following sizes are just for reference.,
Aluminum Alloy material. CNC and Anodized processed. Enough prop mounting ...SDSHobby
6STAR 3.5IN/89MM SPECIAL DRILLED CNC ANODIZED ALUMINUM ALLOY SPINNER FOR DLE30 DLE50 EME55 MLD70 DLA64 ENGINES
| Height | 88mm |
| Diameter of Bottom Plate | 3.5in/89mm |
| Aperture of Bottom Plate | 10mm |
| Screw | M5*60mm(screw thread length |
Features:, Quick and easy installation:, 1), Specifications:, Application Fields:, 1, Engines:, Suitable for DLE30/35RA/40/50/55/55RA/60/61,, . Propellers:, Suitable for 22*8 to 23*10 propellers (such as, Worm Tips:, There are ±1mm tolerance for manual measurement, the following sizes are just for reference.,
Aluminum Alloy material. CNC and Anodized processed. Enough prop mounting ...SDSHobby
6STAR 3.25IN/83MM SPECIAL DRILLED CNC ANODIZED ALUMINUM ALLOY SPINNER FOR DLE30 DLE50 EME55 MLD70 DLA64 ENGINES
| Height | 82mm |
| Diameter of Bottom Plate | 3.25in/83mm |
| Aperture of Bottom Plate | 10mm |
| Screw | M5*55mm(screw thread length |
Features:, Quick and easy installation:, 1), Specifications:, Application Fields:, 1, Engines:, Suitable for DLE30/35RA/40/50/55/55RA/60/61,, . Propellers:, Suitable for 18*6 to 20*10 propellers (such as, Worm Tips:, There are ±1mm tolerance for manual measurement, the following sizes are just for reference.,
Aluminum Alloy material. CNC and Anodized processed. Enough prop mounting ...